Tuesday, 29 September 2015

K Rend Silicone FT

exterior render
Richard Williams Builder’s Merchants in Llandudno Junction and Ruthin are the major supplier of K Rend for North Wales and the North West.

All K Rend products are highly popular choices of exterior render, especially the Silicone FT.
If you have selected the K Rend Silicone FT render for your home it comes in a wide range of natural tones and more vibrant shades. Colour samples are available upon request for you to decide the best shade for your project.

K Rend Silicone FT incorporates the best qualities of silicone water repellents into a cement based render system in its sophisticated design.

This is a great choice of render because although it has high water repellence it is also breathable and allows water vapour to pass through, so the amount of dirt that sticks to the surface is greatly reduced.

The ultra-dry surface is resistant to both algae growth and lime bloom allowing your render colour and finish to last longer.

When applying K Rend Silicone FT it is best applied over a K Rend base coat as part of a two coat system but it can also be used as a one coat system by itself over blockwork. If you have opted for the two coat system it is advisable that both coats are made approximately 10 -12mm thick. Try to get the thickness to a uniform line and level to maintain the best high quality finish possible. If you are applying it over blockwork as part of the one coat system the thickness should be about 16mm.

It is always a good idea to complete a small sample panel to ensure you are happy with your chosen colour of K Rend. Remember that K Rend is created from natural products and this means that colour can vary quite a bit.

Order your K Rend now from Richard Williams Builder’s Merchants on 01492 583423 or 01824 702475.

Photo by Brett and Sue Coulstock / CC BY


No comments:

Post a Comment